No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring 1588v2 on an OC

Configuring 1588v2 on an OC

OC Deployment

As shown in Figure 13-13, when two devices transmit wireless data on the IP bearer network, low-delay transmission must be guaranteed for real-time wireless services. The two devices function as OCs and transmit clock information through 1588v2 messages to ensure clock synchronization between them. OCs can provide a high-precision clock source for devices in a PTP domain using the Building Integrated Timing Supply (BITS) system.

Figure 13-13  Configuring 1588v2 on an OC

Pre-configuration Tasks

Before configuring 1588v2 on an OC, complete the following tasks:

  • Set link layer protocol parameters for interfaces to ensure that the link layer protocol status of the interfaces is Up.

  • Configure a grandmaster clock to correctly obtain clock and time signals from the external clock source.

  • Configure synchronous Ethernet to synchronize the clock frequency on the network.

Configuration Procedure

The process of configuring 1588v2 on an OC is as follows.

Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 39309

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next