No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S9300, S9300E, and S9300X V200R012C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Revertive Switching Delay

(Optional) Setting the Revertive Switching Delay

Context

In a scenario where an E-Trunk works with other services, a member Eth-Trunk may be restored earlier than other services after the faulty master device recovers. If traffic is immediately switched back to the master device, service traffic will be interrupted.

Setting the revertive switching delay prevents this problem. After the revertive switching delay is set, the local Eth-Trunk becomes Up only after the delay timer expires, ensuring service continuity.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run e-trunk e-trunk-id

    The E-Trunk view is displayed.

  3. Run timer revert delay delay-value

    The revertive switching delay is set.

    By default, the revertive switching delay is 120s.

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038290

Views: 99995

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next