No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S9300, S9300E, and S9300X V200R012C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for VLAN Termination

Licensing Requirements and Limitations for VLAN Termination

Involved Network Elements

Other network elements are not required.

Licensing Requirements

VLAN termination (QinQ and Dot1q on a subinterface) is often used on an MPLS network, so the device must be enabled with MPLS. MPLS requires a license. By default, MPLS of a newly purchased device is disabled. To use MPLS, apply for and purchase the license from the equipment supplier. VLAN termination itself can be used without a license.

Version Requirements

Table 8-2  Products and versions supporting VLAN termination

Product

Product Model

Software Version

S9300

S9303, S9306, S9312

V100R002, V100R003, V100R006(C00&C01), V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S9300

S9310

V200R010C00, V200R011C10, V200R012C00, V200R013C00

S9300X

S9310X

V200R010C00, V200R011C10, V200R012C00, V200R013C00

S9300E

S9303E, S9306E, S9312E

V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • Only E series cards, X series cards, F series cards, and SC cards among S series support the termination sub-interface. Starting from V200R007C00, X1E cards among X series cards support termination sub-interfaces. For details, see the card classification in Hardware Description.

  • Termination sub-interfaces cannot be configured on an Eth-Trunk member interface.
  • Add member interfaces to an Eth-Trunk before configuring termination sub-interfaces on the Eth-Trunk. Termination sub-interfaces can be configured successfully on an Eth-Trunk only when all series of cards where member interfaces reside support termination sub-interfaces.
  • The VLANs terminated by a sub-interface cannot be created in the system view or be displayed using a display command.
  • When VLAN IDs terminated by a sub-interface are used for Layer 3 forwarding, only the first VLAN takes effect even if multiple inner VLAN IDs are specified.
  • When VLAN IDs terminated by a sub-interface are used for Layer 3 forwarding, it is recommended that a maximum of 128 VLANs be in all VLAN ranges.
  • If the dot1q termination vid or qinq termination pe-vid ce-vid command is used to configure a VLAN for the VLAN termination sub-interface, the VLAN cannot be configured as a super-VLAN or sub-VLAN.
  • If the PW-side interface is a Layer 3 interface switched by the undo portswitch command, the AC-side interface cannot be a Layer 3 interface or subinterface belonging to a Layer 3 interface; otherwise, traffic forwarding is abnormal.

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038290

Views: 113887

Downloads: 24

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next