No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S9300, S9300E, and S9300X V200R012C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How to Configure BPDU Tunnel to Transparently Transmit BPDUs?

How to Configure BPDU Tunnel to Transparently Transmit BPDUs?

  • To transparently transmit untagged BPDUs, perform the following configuration:

    • In earlier versions of V100R003:

      [Quidway-GigabitEthernet3/0/0] bpdu-tunnel stp enable
    • In V100R003 and later versions:

      [Quidway-GigabitEthernet3/0/0] l2protocol-tunnel stp enable
  • To transparently transmit tagged BPDUs, perform the following configuration:

    • In earlier versions of V100R003:

      [Quidway-GigabitEthernet3/0/0] bpdu-tunnel stp vlan 3
    • In V100R003 and later versions:

      [Quidway-GigabitEthernet3/0/0] l2protocol-tunnel stp vlan 3 
Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038290

Views: 110857

Downloads: 24

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next