No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S9300, S9300E, and S9300X V200R012C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for STP/RSTP

Licensing Requirements and Limitations for STP/RSTP

Involved Network Elements

Other network elements also need to support STP or RSTP.

Licensing Requirements

STP or RSTP is a basic feature of a switch and is not under license control.

Version Requirements

Table 13-13  Products and versions supporting STP or RSTP

Product

Product Model

Software Version

S9300

S9303, S9306, S9312

V100R002, V100R003, V100R006(C00&C01), V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S9300

S9310

V200R010C00, V200R011C10, V200R012C00, V200R013C00

S9300X

S9310X

V200R010C00, V200R011C10, V200R012C00, V200R013C00

S9300E

S9303E, S9306E, S9312E

V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

When STP or RSTP is enabled on a ring network, STP or RSTP immediately starts spanning tree calculation. Parameters such as the device priority and port priority affect spanning tree calculation, and changing these parameters may cause network flapping. To ensure fast and stable spanning tree calculation, configure parameters such as the device priority and port priority before enabling STP or RSTP.

On a switch enabled with a spanning tree protocol, when a terminal connects to the switch, spanning tree calculation is performed again. As a result, it takes a long period of time for the terminal to obtain an IP address. In this case, disable the spanning tree protocol on the switch port connected to the terminal or configure this switch port as the edge port.

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038290

Views: 111740

Downloads: 24

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next