No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S9300, S9300E, and S9300X V200R012C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hybrid SEP+MSTP Ring Networking

Hybrid SEP+MSTP Ring Networking

In hybrid-ring networking, no-neighbor edge interfaces need to be deployed on the edge devices of SEP networks, and the SEP networks need to report topology changes to MSTP networks. When SEP runs at the access layer, redundancy protection switching can be implemented at the access layer.

Figure 16-13 shows a networking diagram of hybrid rings running SEP+MSTP.

Figure 16-13  Hybrid rings running SEP+MSTP

In Figure 16-13, LSW1 to LSW3 form a SEP segment to access the MSTP ring. LSW1 to LSW3 are at the access layer and transparently transmit Layer 2 unicast and multicast services.

If the topology of the access layer changes, a node in the SEP segment sends a Flush-FDB packet to instruct other nodes in the SEP segment to update their MAC address tables and ARP tables. LSW1 and LSW2 at the edge of the SEP segment send a TC packet to notify the aggregation layer of the topology change in the SEP segment.

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038290

Views: 113465

Downloads: 24

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next