No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S9300, S9300E, and S9300X V200R012C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, HVRP, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Enable a VLAN Stacking Interface to Transparently Transmit Packets with VLAN IDs out of the C-VLAN List Configured for VLAN Stacking?

How Can I Enable a VLAN Stacking Interface to Transparently Transmit Packets with VLAN IDs out of the C-VLAN List Configured for VLAN Stacking?

After configuring VLAN Stacking on an interface of a G24SA or G24CA LPU, enable the interface to transparently transmit packets with VLAN IDs out of the C-VLAN list by configuring VLAN mapping entries in which the original and translated VLAN IDs are the same. If you do not perform this configuration, the switch adds a VLAN tag with the interface's PVID to such packets.

For example, if VLAN 10 is not in the C-VLAN list configured for VLAN Stacking, perform the following configuration to enable the interface to transparently transmit packets of VLAN 10:

<Quidway> system-view
[Quidway] interface gigabitethernet 1/0/0
[Quidway-GigabitEthernet1/0/0] port vlan-mapping vlan 10 map-vlan 10

On other types of LPUs, such packets can be transparently transmitted without the need to perform the preceding configuration.

Translation
Download
Updated: 2019-01-18

Document ID: EDOC1100038290

Views: 112952

Downloads: 24

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next