No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of VCMP

Overview of VCMP

Definition

The Virtual Local Area Network Central Management Protocol (VCMP), a Layer 2 protocol in the Open System Interconnection (OSI) model, transmits VLAN information and ensures consistent VLAN information on the Layer 2 network.

Purpose

In most cases, switches on an enterprise network need to synchronize VLAN information with each other to ensure that they can correctly forward data. On a small-scale enterprise network, the network administrator can log in to each switch to configure and maintain VLANs. On a large-scale enterprise network, a lot of switches are deployed, so a large amount of VLAN information needs to be configured and maintained. If the network administrator manually configures and maintains all VLANs, the workload is heavy and VLAN information may be inconsistent.

VCMP is used to implement centralized VLAN management. The network administrator needs to create and delete VLAN information only on a switch. The changes on the switch are automatically synchronized to other switches in a specified scope so that no manual operation is required on these switches. In this way, the configuration workload is reduced and VLAN information consistency is ensured.

NOTE:
  • VCMP can only help the network administrator synchronize VLAN information but not dynamically assign VLANs. VCMP is often used with Link-type Negotiation Protocol (LNP) to simplify user configurations. For details about LNP, see LNP.

  • Generic VLAN Registration Protocol (GVRP) can reduce VLAN configurations and dynamically assign interfaces to VLANs. GVRP creates dynamic VLANs, but VCMP creates static VLANs.

Benefits to Customers

VCMP configured on a switch of a Layer 2 network brings in the following benefits:
  • Implements centralized VLAN management and maintenance, and reduces the network maintenance workload.
  • Implements the plug-and-play function of access switches.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 167356

Downloads: 699

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next