No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for VLAN Termination

Licensing Requirements and Limitations for VLAN Termination

Involved Network Elements

Other network elements are not required.

Licensing Requirements

VLAN termination, that is, QinQ and Dot1q on a subinterface, is a basic feature of a switch and is not under license control.

Version Requirements

Table 7-2  Products and versions supporting VLAN termination
Product Product Model Software Version
S2700 S2700SI Not supported
S2700EI Not supported
S2710SI Not supported
S2720EI Not supported
S2750EI Not supported
S3700 S3700SI Not supported
S3700EI Not supported
S3700HI Not supported
S5700 S5700LI, S5700S-LI Not supported
S5710-C-LI Not supported
S5710-X-LI Not supported
S5700EI Not supported
S5700SI Not supported

V200R001C00, V200R002C00, V200R003C00, V200R005(C00&C02)

S5720EI V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00
S5720SI, S5720S-SI Not supported
S5720I-SI Not supported
S5720LI, S5720S-LI Not supported

V100R006C01, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005(C00SPC500&C01&C02)


V200R003C00, V200R005(C00&C02&C03)

S5720HI V200R007C10, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00



Not supported


Not supported
S6700 S6700EI

V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005(C00&C01&C02)


V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00


V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S6720LI, S6720S-LI

Not supported

S6720SI, S6720S-SI

Not supported



For details about software mappings, visit Hardware Query Tool and search for the desired product model.

For feature support of S1700 series switches, see S1700 Series Enterprise Switches - Specifications.

Feature Limitations

  • Termination sub-interfaces cannot be configured on an Eth-Trunk member interface.
  • Add member interfaces to an Eth-Trunk before configuring termination sub-interfaces on the Eth-Trunk. Termination sub-interfaces can be configured successfully on an Eth-Trunk only when the device where member interfaces reside support termination sub-interfaces.
  • The VLANs terminated by a sub-interface cannot be created in the system view or be displayed using a display command.
  • When VLAN IDs terminated by a sub-interface are used for Layer 3 forwarding, only the first VLAN takes effect even if multiple inner VLAN IDs are specified.
  • VLAN termination sub-interfaces cannot be created on a VCMP client.
  • If the dot1q termination vid or qinq termination pe-vid ce-vid command is used to configure a VLAN for the VLAN termination sub-interface, the VLAN cannot be configured as a super-VLAN or sub-VLAN.
  • If the PW-side routing interface is a Layer 3 interface switched by the undo portswitch command, the AC-side interface cannot be a Layer 3 routing interface or its sub-interface belonging to a Layer 3 interface; otherwise, traffic fails to be forwarded. This rule applies to S5720EI, S6720EI, and S6720S-EI.

Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 161513

Downloads: 688

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next