Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Link Aggregation in LACP Mode
Verifying the Configuration of Link Aggregation in LACP Mode
Procedure
Run the display eth-trunk [ trunk-id [ interfaceinterface-typeinterface-number | verbose ] ] command to check the Eth-Trunk configuration.
Run the display trunkmembership eth-trunktrunk-id command to check information about Eth-Trunk member interfaces.
Run the display eth-trunk [ trunk-id ] load-balance command to check the load balancing mode of the Eth-Trunk.
Run
the display load-balance-profile [ profile-name ] command to check the load balancing
profile of the Eth-Trunk.