No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the MEL Value

(Optional) Configuring the MEL Value


On a Layer 2 network running ERPS, if another fault detection protocol (for example, CFM) is enabled, the MEL field in RAPS PDUs determines whether the RAPS PDUs can be forwarded. If the MEL value in an ERPS ring is smaller than the MEL value of the fault detection protocol, the RAPS PDUs have a lower priority and are discarded. If the MEL value in an ERPS ring is larger than the MEL value of the fault detection protocol, the RAPS PDUs can be forwarded. In addition, the MEL value can also be used for interworking with other vendors' devices in an ERPS ring. The same MEL value ensures smooth communication between devices.


  1. Run system-view

    The system view is displayed.

  2. Run erps ring ring-id

    The ERPS ring view is displayed.

  3. Run raps-mel level-id

    The MEL value in the ERPS ring is set.

    By default, the MEL value in RAPS PDUs is 7.

Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 168592

Downloads: 703

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next