No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring QinQ Mapping

Configuring QinQ Mapping

QinQ mapping maps customer VLAN (C-VLAN) tags to service VLAN (S-VLAN) tags so that packets only need to be processed based on S-VLAN tags.

Pre-configuration Tasks

Before configuring QinQ mapping, complete the following tasks:
  • Connect the device correctly.
  • Configure the VLANs to which users belong so that user packets carry single or double VLAN tags.
  • Ensure that the device is not a VCMP client.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 156373

Downloads: 680

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next