No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying MAC Address Entries

Displaying MAC Address Entries

Table 2-9  Commands used to display MAC address entries

Action

Command

Display all MAC address entries.

display mac-address

Display static MAC address entries.

display mac-address static

Display static MAC address entries in a specified VLAN.

display mac-address static vlan vlan-id

Display MAC address entries learned in a VLAN.

display mac-address dynamic vlan vlan-id

Display MAC address entries learned on an interface.

display mac-address dynamic interface-type interface-number

Check whether a specified MAC address is present.

display mac-address mac-address

Display the aging time of dynamic MAC address entries.

display mac-address aging-time

Display statistics on MAC address entries.

  • Display the total statistics: display mac-address total-number
  • Display the statistics of various types of MAC address entries: display mac-address summary

Display the system MAC address.

display bridge mac-address

Display the MAC address of an interface.

display interface interface-type interface-number

In the command output, Hardware address indicates the MAC address of the interface.

Display the MAC address of a VLANIF interface.

display interface vlanif vlan-id

In the command output, Hardware address indicates the MAC address of the VLANIF interface.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 161753

Downloads: 688

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next