Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Root Protection on a Port
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The view of an interface participating in STP calculation is displayed.
- Run stp root-protection
Root protection is enabled on the interface.
By default, root protection is disabled on an interface. Root protection takes effect only on designated ports. Root protection and loop protection cannot be configured on the same interface.
Previous
