Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Super-VLAN
Context
A super-VLAN consists of one or more sub-VLANs. A VLANIF interface can be configured for the super-VLAN and assigned an IP address (no physical interface can be added to a super-VLAN).
Procedure
- Run system-view
The system view is displayed.
- Run vlan vlan-id
A VLAN is created and the VLAN view is displayed.
The VLAN ID of a super-VLAN must be different from each sub-VLAN ID.
- Run aggregate-vlan
A super-VLAN is created.
No physical interface can be added to a super-VLAN.
VLAN 1 cannot be configured as a super-VLAN.
- Run access-vlan { vlan-id1 [ to vlan-id2 ] } &<1-10>
A sub-VLAN is added to a super-VLAN.
Before adding any sub-VLANs to a super-VLAN, ensure that they are not configured with VLANIF interfaces.
Previous
