No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Can I Directly Delete Inner VLAN IDs from QinQ Configuration?

Can I Directly Delete Inner VLAN IDs from QinQ Configuration?

  • If the switch is running V100R005 or an earlier version, one or more inner VLAN IDs in QinQ configuration cannot be directly deleted. You must delete the current selective QinQ configuration, and then reconfigure the inner VLAN IDs that do not need to be deleted. For example, if the port vlan-stacking vlan 10 to 20 stack-vlan 100 command is configured on the switch, you can perform the following operations to delete inner VLAN 15:
    1. Run the undo port vlan-stacking vlan 10 to 20 stack-vlan 100 command to delete the current selective QinQ configuration.
    2. Run the port vlan-stacking vlan 10 to 14 stack-vlan 100 and port vlan-stacking vlan 16 to 20 stack-vlan 100 commands to reconfigure the inner VLAN IDs that do not need to be deleted.
  • If the switch is running a version later than V100R005, one or more inner VLAN IDs in QinQ configuration can be directly deleted.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 168358

Downloads: 701

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next