No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for LDT and LBDT

Licensing Requirements and Limitations for LDT and LBDT

Involved Network Elements

Other network elements are not required.

Licensing Requirements

LBDT is a basic feature of a switch and is not under license control.

Version Requirements

Table 19-3  Products and versions supporting LBDT

Product

Product Model

Software Version

S2700 S2700SI

V100R005C01, V100R006(C00&C01&C03&C05)

S2700EI

V100R005C01, V100R006(C00&C01&C03&C05)

S2710SI

V100R006(C03&C05)

S2720EI

V200R006C10, V200R009C00, V200R010C00, V200R011C10, V200R012C00

S2750EI

V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S3700 S3700SI

V100R005C01, V100R006(C00&C01&C03&C05)

S3700EI

V100R005C01, V100R006(C00&C01&C03&C05)

S3700HI

V100R006C01, V200R001C00

S5700 S5700LI

V200R001C00, V200R002C00, V200R003(C00&C02&C10), V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5700S-LI

V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5710-C-LI

V200R001C00

S5710-X-LI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5700EI

V100R005C01, V100R006(C00&C01), V200R001(C00&C01), V200R002C00, V200R003C00, V200R005(C00&C01&C02&C03)

S5700SI

V100R005C01, V100R006C00, V200R001C00, V200R002C00, V200R003C00, V200R005C00

S5710EI

V200R001C00, V200R002C00, V200R003C00, V200R005(C00&C02)

S5720EI

V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5720LI, S5720S-LI

V200R010C00, V200R011C00, V200R011C10, V200R012(C00&C20)

S5720SI, S5720S-SI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5720I-SI

V200R012C00

S5700HI

V100R006C01, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005(C00SPC500&C01&C02)

S5710HI

V200R003C00, V200R005(C00&C02&C03)

S5720HI

V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5730HI

V200R012C00

S5730SI

V200R011C10, V200R012C00

S5730S-EI

V200R011C10, V200R012C00

S6700 S6700EI

V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005(C00&C01&C02)

S6720EI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S6720S-EI

V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S6720LI, S6720S-LI

V200R011C00, V200R011C10, V200R012C00

S6720SI, S6720S-SI

V200R011C00, V200R011C10, V200R012C00

S6720HI

V200R012C00

NOTE:

For details about software mappings, visit Hardware Query Tool and search for the desired product model.

For feature support of S1700 series switches, see S1700 Series Enterprise Switches - Specifications.

Feature Limitations

  • In V200R008C00 and earlier versions, LBDT does not take effect in dynamic VLANs. In V200R008C00 and later versions, the LBDT-enabled switch can detect loops in dynamic VLANs, but the Quitvlan action is invalid for dynamic VLANs.

  • LBDT requires that the device should send a large number of detection packets to detect loops, occupying system resources. Therefore, disable LBDT if loops do not need to be detected.

  • LBDT cannot be configured on an Eth-Trunk or its member interfaces.

  • The blocked ports of LBDT cannot block GVRP packets. To ensure that GVRP runs normally and prevent GVRP loops, do not enable GVRP on the blocked port of LBDT.
  • The S2700SI and S2710SI support only detection of self-loops on an interface, and do not support detection loops on the downstream device or between interfaces.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 169226

Downloads: 703

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next