No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Voice VLANs

Application Scenarios for Voice VLANs

Figure 8-5 shows PCs and IP phones connecting to the Internet through switches. Because the voice service is sensitive to delay and jitter, the priority of voice data flows needs to be increased so that they can be preferentially forwarded when congestion occurs.

Figure 8-5  Applicable scenario of the voice VLAN

Configure a voice VLAN based on the type of voice packets sent by IP phones:
  • Configure MAC address-based voice VLAN when voice packets are untagged or tagged with VLAN 0.
  • Configure VLAN ID-based voice VLAN when IP phones can obtain voice VLAN information on the switch.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 157461

Downloads: 685

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next