No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Value of the Link-Up Timer

(Optional) Setting the Value of the Link-Up Timer

Context

After the value of the Link-Up timer is set, the RRPP link does not immediately change its status but changes the status when the Link-Up timer times out. This reduces flapping of the link status.

You only need to set the value of the Link-Up timer on the master node.

Procedure

  1. On the master node, run system-view

    The system view is displayed.

  2. Run rrpp linkup-delay-timer linkup-delay-timer-value

    The value of the Link-Up timer is set for the RRPP link.

    The value set by the linkup-delay-timer-value command must be no larger than the value of the Fail timer minus twice the value of the Hello timer. The default value of the Link-Up timer is 0.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 160067

Downloads: 687

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next