No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining Link Aggregation

Maintaining Link Aggregation

Maintaining link aggregation includes monitoring the link aggregation running status and clearing LACPDU statistics.

Maintenance Item


Displaying the Eth-Trunk configuration

Run the display eth-trunk [ trunk-id [ interface interface-type interface-number | verbose ] ] command to check the Eth-Trunk configuration.

Displaying the Eth-Trunk status

Run the display interface eth-trunk [ trunk-id ] command.

Displaying information about Eth-Trunk member interfaces

Run the display trunkmembership eth-trunk trunk-id command.

Displaying statistics on received and sent LACPDUs in LACP mode

Run the display lacp statistics eth-trunk [ trunk-id [ interface interface-type interface-number ] ] command.

Clearing LACPDU statistics


The cleared LACPDU statistics cannot be restored.

Run the reset lacp statistics eth-trunk [ trunk-id [ interface interface-type interface-number ] ] command in the user view.

Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 159960

Downloads: 687

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next