No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for GVRP

Licensing Requirements and Limitations for GVRP

Involved Network Elements

Other network elements are not required.

Licensing Requirements

GVRP is a basic feature of a switch and is not under license control.

Version Requirements

Table 11-1  Products and versions supporting GVRP

Product

Product Model

Software Version

S2700 S2700SI Not supported
S2700EI

V100R005C01, V100R006(C00&C01&C03&C05)

S2710SI Not supported
S2720EI

V200R006C10, V200R009C00, V200R010C00, V200R011C10, V200R012C00

S2750EI

V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S3700 S3700SI

V100R005C01, V100R006(C00&C01&C03&C05)

S3700EI

V100R005C01, V100R006(C00&C01&C03&C05)

S3700HI

V100R006C01, V200R001C00

S5700 S5700LI

V200R001C00, V200R002C00, V200R003(C00&C02&C10), V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5700S-LI

V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5710-C-LI

V200R001C00

S5710-X-LI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5700EI

V100R005C01, V100R006(C00&C01), V200R001(C00&C01), V200R002C00, V200R003C00, V200R005(C00&C01&C02&C03)

S5700SI

V100R005C01, V100R006C00, V200R001C00, V200R002C00, V200R003C00, V200R005C00

S5710EI

V200R001C00, V200R002C00, V200R003C00, V200R005(C00&C02)

S5720EI

V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5720LI, S5720S-LI

V200R010C00, V200R011C00, V200R011C10, V200R012(C00&C20)

S5720SI, S5720S-SI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5720I-SI

V200R012C00

S5700HI

V100R006C01, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005(C00SPC500&C01&C02)

S5710HI

V200R003C00, V200R005(C00&C02&C03)

S5720HI

V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5730HI

V200R012C00

S5730SI

V200R011C10, V200R012C00

S5730S-EI

V200R011C10, V200R012C00

S6700 S6700EI

V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005(C00&C01&C02)

S6720EI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S6720S-EI

V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S6720LI, S6720S-LI

V200R011C00, V200R011C10, V200R012C00

S6720SI, S6720S-SI

V200R011C00, V200R011C10, V200R012C00

S6720HI

V200R012C00

NOTE:

For details about software mappings, visit Hardware Query Tool and search for the desired product model.

For feature support of S1700 series switches, see S1700 Series Enterprise Switches - Specifications.

Feature Limitations

  • When many dynamic VLANs need to be registered or the network radius is large, using default values of timers may cause VLAN flapping and high CPU usage. In this case, increase values of the timers. The following values are recommended depending on the number of VLANs.
    Table 11-2  Relationship between GARP timer values and number of dynamic VLANs that need to be registered

    Timer

    Number of Dynamic VLANs to Be Registered (N)

    N <= 500

    500 < N <= 1000

    1000 < N <= 1500

    N > 1500

    GARP Hold timer

    100 centiseconds (1 second)

    200 centiseconds (2 seconds)

    800 centiseconds (8 seconds)

    1000 centiseconds (10 seconds)

    GARP Join timer

    600 centiseconds (6 seconds)

    1200 centiseconds (12 seconds)

    4000 centiseconds (40 seconds)

    6000 centiseconds (1 minute)

    GARP Leave timer

    3000 centiseconds (30 seconds)

    6000 centiseconds (1 minute)

    20000 centiseconds (3 minutes and 20 seconds)

    30000 centiseconds (5 minutes)

    GARP LeaveAll timer

    12000 centiseconds (2 minutes)

    24000 centiseconds (4 minutes)

    30000 centiseconds (5 minutes)

    32765 centiseconds (5 minutes and 27.65 seconds)

  • The blocked port in instance 0 of STP/RSTP/MSTP can block GVRP packets; the blocked ports of other MSTIs and other ring network protocols such as ERPS, SEP, RRPP, Smart Link, and VBST cannot block GVRP packets. To ensure that GVRP runs normally and prevent GVRP loops, do not enable GVRP on the blocked port of a ring network protocol.
  • The blocked ports of LBDT cannot block GVRP packets. To ensure that GVRP runs normally and prevent GVRP loops, do not enable GVRP on the blocked port of LBDT.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038339

Views: 159962

Downloads: 687

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next