No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Network Server Addresses for the IPv6 Address Pool

(Optional) Configuring Network Server Addresses for the IPv6 Address Pool

Context

To successfully connect DHCPv6 clients to the Internet, the DHCPv6 server needs to specify network service configurations such as the DNS server address and SIP server address when assigning IPv6 addresses to the clients. The DHCPv6 server dynamically allocates carrier-assigned configurations such as the DNS server address and SIP server address to DHCPv6 clients.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run dhcpv6 pool pool-name

    An IPv6 address pool is created and the address pool view is displayed.

    By default, no IPv6 address pool is created on the device.

  3. In the IPv6 address pool view, you can run one or more following commands to configure network server addresses.

    • Run the dns-server ipv6-address command to configure the DNS server address for the DHCPv6 address pool.
    • Run the dns-domain-name dns-domain-name command to configure the DNS domain name suffix allocated by the DHCPv6 server to the client.
    • Run the sip-server ipv6-address command to configure the SIP server IPv6 address for the DHCPv6 address pool.
    • Run the sip-domain-name sip-domain-name command to configure the SIP domain name suffix allocated by the DHCPv6 server to the client.
    • Run the nis-server ipv6-address command to configure the NIS server IPv6 address for the DHCPv6 address pool.
    • Run the nis-domain-name nis-domain-name command to configure the NIS domain name suffix allocated by the DHCPv6 server to the client.
    • Run the nisp-server ipv6-address command to configure the NISP server IPv6 address for the DHCPv6 address pool.
    • Run the nisp-domain-name nisp-domain-name command to configure the NISP domain name suffix allocated by the DHCPv6 server to the client.
    • Run the sntp-server ipv6-address command to configure the SNTP server IPv6 address for the DHCPv6 address pool.

    By default, DNS, SIP, NIS, NISP, and SNTP server addresses are not configured for the IPv6 address pool.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038342

Views: 90544

Downloads: 291

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next