No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of DHCP Configuration Tasks

Summary of DHCP Configuration Tasks

Table 3-6  Summary of DHCP configuration tasks

Scenario

Task

A device functions as a DHCP server and allocates IP addresses and other network parameters (including gateway address, DNS service, NetBIOS Service, and options) to clients on the local network segment.

Perform the tasks specified in Configuring a DHCP Server in the following sequence:
  1. Enabling DHCP
  2. Enabling the DHCP Server Function
  3. Configuring a DHCP Server to Allocate IP Addresses to Clients
  4. (Optional) Configuring a DHCP Server to Allocate Network Parameters Besides IP Addresses

When a DHCP server resides on a different network segment from DHCP clients, a DHCP relay agent is required to help the DHCP server allocate network parameters including IP addresses to DHCP clients.

In this scenario, a switch functions as a DHCP relay agent, and the DHCP server can be a dedicated DHCP server or a switch.

Configuring a DHCP Relay Agent

A device functions as a DHCP client and dynamically obtains an IP address from a DHCP server.

Configuring a Device as a DHCP Client

A device functions as a BOOTP client and dynamically obtains an IP address from a DHCP server.

Configuring a Device as a BOOTP Client
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038342

Views: 84503

Downloads: 281

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next