No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Locking a DHCP Address Pool

Locking a DHCP Address Pool

Context

When a DHCP server is migrated, address pools on the DHCP server need to be transferred to a DHCP server on the live network. To prevent impacting clients that have obtained IP address from the to-be-migrated DHCP server, lock the address pools on the DHCP server. After the migration, new users apply for IP addresses from the new address pool.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the ip pool ip-pool-name command to enter the global address pool view.
  3. Run the lock command to lock the address pool.

    By default, address pools on a device are not locked.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038342

Views: 90567

Downloads: 291

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next