No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the TCP6 Sliding Window Size

Setting the TCP6 Sliding Window Size

Context

You can set a TCP6 sliding window size to improve network performance. The sliding window size indicates the receive or send buffer size of a TCP6 socket.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run tcp ipv6 window window-size

    The receive or send buffer size of a TCP6 socket is set.

    By default, the receive or send buffer size of a TCP6 socket is 8 KB. The receive or send buffer size of a TCP6 socket ranges from 1 KB to 32 KB.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038342

Views: 85006

Downloads: 281

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next