No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the IPv6 Static Domain Name Resolution

Configuring the IPv6 Static Domain Name Resolution

Context

An IPv6 static domain name resolution table is manually set up, describing the mappings between domain names and IPv6 addresses. Some common domain names are added to the table. Static domain name resolution can be performed based on the IPv6 static domain name resolution table. To obtain the IPv6 address by resolving a domain name, the client searches the IPv6 static domain name resolution table for the specified domain name. In this manner, the efficiency of domain name resolution is improved.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ipv6

    The switch is enabled to forward IPv6 unicast packets.

    By default, the switch is disabled from forwarding IPv6 unicast packets.

  3. Run ipv6 host host-name ipv6-address [ vpn-instance vpn-instance-name ]

    The IPv6 static DNS entry is configured.

    By default, no IPv6 static DNS entry is configured.

    Each domain name supports a maximum of eight IPv6 addresses.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038342

Views: 89576

Downloads: 287

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next