No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S1720, S2700, S5700, and S6720 V200R012(C00 and C20)

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the DHCP Server Configuration

Verifying the DHCP Server Configuration

Procedure

  • Check IP address allocation information in address pools using the following commands:

    • Interface address pool:

      display ip pool [ interface interface-pool-name [ start-ip-address [ end-ip-address ] | all | conflict | expired | used ] ]

    • Global address pool:

      display ip pool [ name ip-pool-name [ start-ip-address [ end-ip-address ] | all | conflict | expired | used [ user-type { dhcp | pppoe | l2tp | ipsec | ssl-vpn | ppp } ] ] ]

    NOTE:

    conflict displays the conflicting IP addresses in an address pool.

    expired displays the expired IP addresses in an address pool.

    used displays the IP addresses used in an address pool.

  • Run the display dhcp server database command to view the path for storing the DHCP database.
  • Run the display dhcp option template [ name template-name ] command to view the configuration of a DHCP Option template.
  • Run the display dhcp server configuration command to check configurations about the DHCP server.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038342

Views: 85609

Downloads: 283

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next