No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Network Element Name

(Optional) Configuring a Network Element Name


A network element is a physical device or service unit on the network topology. Each AC is a network element.

You can configure network element names for ACs so that the ACs can be identified by an NMS.


  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run ac sysnetid ac-sysnetid

    A network element name is configured for the AC.

    By default, no NE name is configured for an AC.

Verifying the Configuration

  • Run the display ac global configuration command to check global configurations of an AC, including the AC's NE name.
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 159207

Downloads: 440

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next