No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Attack Device Detection

Attack Device Detection

In Figure 10-6, the campus wireless network uses the WPA2-PSK authentication mode. Attackers use terminals to initiate flood attacks to the wireless network and attempts to use the brute force method to decrypt the password. After detecting the attack device, the AC adds the attack device to the dynamic blacklist and does not process any packet of the device to prevent attacks.

Figure 10-6  Configuring WIDS and WIPS against attack devices

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 146303

Downloads: 421

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next