No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - WLAN-AC
S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Reference Relationships Between WLAN Profiles

Reference Relationships Between WLAN Profiles

Various profiles are designed based on different functions and features of WLAN networks to help users configure and maintain functions of WLAN networks. These profiles are called WLAN profiles. Figure 3-1 shows the referencing relationships between WLAN profiles. By getting to know the referencing relationships, users can easily grasp the configuration roadmap of WLAN profiles and complete their configurations.

As shown in Figure 3-1, the following profiles can be bound to the AP group and AP: radio profile, VAP profile, Location profile, regulatory domain profile, AP system profile, WIDS profile, AP wired port profile, WDS profile, and Mesh profile. Some of the listed profiles can further reference other profiles, for example, the radio profile can reference an air scan profile and an RRM profile.

Figure 3-1  Reference relationships between WLAN profiles
AP Group and AP AP Group and AP Regulatory Domain Profile Radio Profile Air Scan Profile RRM Profile VAP Profile SSID Profile Security Profile Authentication Profile Authentication Profile Security Profile Security Profile Traffic Profile STA Blacklist Profile STA Blacklist Profile STA Whitelist Profile STA Whitelist Profile AP System Profile AP Wired Port Profile AP Wired Port Link Profile WIDS Profile WIDS Spoof SSID Profile WIDS Whitelist Profile Location Profile BLE Profile WDS Profile WDS Whitelist Profile Mesh Profile Mesh Handover Profile Mesh Whitelist Profile WMI Profile
  • The profiles marked with * can be configured as default profiles.

  • AP provisioning profiles cannot be referenced by other profiles and are only used to deliver configurations to specified APs or AP groups. Therefore, this figure does not show AP provisioning profiles.

  • An AP radio can directly reference some profiles, including the radio profile, VAP profile, WDS profile, WDS whitelist profile, Mesh profile, and Mesh whitelist profile.

  • The IoT profiles are directly referenced in the IoT card interface view and are not displayed.

WLAN profiles are designed to facilitate configuration and maintenance of WLAN functions. When configuring WLAN service functions, users need to configure parameters in matching WLAN profiles. After completing the configurations, they need to bind the profiles to upper-level profiles, AP groups, or APs, and the configurations will be automatically delivered to APs. After that, the configured functions automatically take effect on the APs.

  • If a WLAN profile is bound to an upper-level profile, this upper-level profile should be bound to an AP group or AP.

  • Configurations in an AP provisioning profile take effect only after they are manually delivered to APs. Configurations in other WLAN profiles are automatically delivered to APs.

For example, to configure air interface scan parameters, you can configure the parameters in an air scan profile and bind the air scan profile to a radio profile, which is then bound to an AP group or AP, as shown in Figure 3-1. The configurations of air interface scan parameters are automatically delivered to APs and take effect. If referencing relationships between profiles are set in advance, parameter configurations in the air scan profile are automatically delivered to APs.

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 228823

Downloads: 549

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next