No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Central AP and RUs to Go Online

Configuring the Central AP and RUs to Go Online

Pre-configuration Tasks

Before configuring the central AP and RUs to go online, perform the task of CLI Login Configuration.

Configuration Procedure

The procedure for configuring the central AP and RUs to go online is similar to that for configuring the APs to go online. For details, see Configuring APs to Go Online. The differences are as follows:

  • The RUs and central AP reside on the same Layer 2 network on an agile distributed WLAN. The default PVID of the central AP's downlink interfaces is the management VLAN ID and cannot be changed. That is, the central AP's downlink interfaces join the management VLAN (mVLAN) by default and cannot be removed from the mVLAN, but they can be added to other VLANs. The working mode of the interfaces must be set to middle.

  • RUs can go online only after the central AP reports RU information to the AC. Therefore, the central AP must go online first.

  • Each RU can only discover one central AP. After the central AP and RUs go online, the AC delivers configurations to the central AP, and the central AP delivers configurations to its connected RUs.
  • If an AP group is not specified for an RU, the RU automatically joins the AP group that the central AP belongs to.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 128101

Downloads: 383

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next