No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Wireless Coverage Service

Configuring the Wireless Coverage Service

Context

A WLAN can be reused as the IoT network for student health and safety management, reducing network deployment and maintenance costs and helping administrators to manage the network.

This document provides only basic wireless coverage service configurations. For more information, see WLAN Service Configuration.

Perform the following operations on the AC to configure an AP to go online.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vlan batch vlan-id

    A VLAN is created.

  3. Run wlan

    The WLAN view is displayed.

  4. Run security-profile name profile-name

    A security profile is created and the security profile view is displayed.

    By default, security profiles default, default-wds, and default-mesh are available in the system.

    After the security profile is created, using the default security policy has security risks. You are advised to configure a proper security policy according to actual service requirements. For the detailed configuration, see Configuring a WLAN Security Policy.

  5. Run quit

    Return to the WLAN view.

  6. Run ssid-profile name profile-name

    An SSID profile is created and the SSID profile view is displayed.

    By default, the system provides the SSID profile default.

  7. Run ssid ssid

    An SSID name is configured.

    By default, the SSID HUAWEI-WLAN is configured in an SSID profile.

  8. Run quit

    Return to the WLAN view.

  9. Run vap-profile name profile-name

    The VAP profile view is displayed.

  10. Run security-profile profile-name

    The security profile is bound to the VAP profile.

    By default, the security profile default is bound to a VAP profile.

  11. Run forward-mode { direct-forward | tunnel | softgre profile-name }

    The data forwarding mode is configured in the VAP profile.

    By default, the forwarding mode is direct-forward in the VAP profile.

  12. Run service-vlan { vlan-id vlan-id | vlan-pool pool-name }

    A service VLAN is configured for a VAP.

    By default, VLAN 1 is the service VLAN of a VAP.

  13. Run ssid-profile profile-name

    The SSID profile is bound to the VAP profile.

    By default, the SSID profile default is bound to a VAP profile.

  14. Run quit

    Return to the WLAN view.

  15. Run ap-group name group-name

    An AP group is created, and the AP group view is displayed.

  16. Run vap-profile profile-name wlan wlan-id radio { radio-id | all } [ service-vlan { vlan-id vlan-id | vlan-pool pool-name } ]

    The VAP profile is bound to radios.

    By default, no VAP profile is bound to a radio.

Verifying the Configuration

  • Run the display vap { all | ssid ssid } or display vap { ap-group ap-group-name | { ap-name ap-name | ap-id ap-id } [ radio radio-id ] } [ ssid ssid ] command to check service VAP information.
  • Run the display vap-profile { all | name profile-name } command to check configuration and reference information about a VAP profile.
  • Run the display references vap-profile name profile-name command to check reference information about the VAP profile.
  • Run the display security-profile { all | name profile-name } command to check configuration and reference information about the security profile.
  • Run the display references security-profile name profile-name command to check reference information about the security profile.
  • Run the display ssid-profile { all | name profile-name } command to check configuration and reference information about the SSID profile.
  • Run the display references ssid-profile name profile-name command to check reference information about the SSID profile.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 111020

Downloads: 368

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next