No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Spectrum Graphs

Checking Spectrum Graphs


After spectrum analysis is enabled on the AC, you can view AP spectrum on the eSight (V300R003C20) to learn interferences surrounding APs in deployment sites. This helps identify and locate interference devices on the WLAN in a timely manner so that radio calibration can be implemented on the WLAN.

As for dual-band APs, you can view the 2.4 GHz or 5 GHz spectrum graph.

Spectrum graphs include real-time FFT, depth, channel quality, channel quality trend, and device percentage charts.


  1. Choose Business > WLAN Management > Region Monitor from the main menu.
  2. Use either of the following methods to access the region object manager.

    • In the monitoring mode, right-click a region in Resource on the left pane, and select Region Object Manager.
    • In the 360 topology view, click a region name in the region list at the bottom of page to display the object manager of the selected region.
    In the region object manager view, you can click to select other regions.

  3. Choose AP from the navigation tree of the Region Object Manager.
  4. In the AP list, click and select Spectrum Analysis in the Operation column.
  5. Click Index Configure, choose a spectrum graph type, and click Confirm to view the spectrum graph of the selected AP.

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 160288

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next