No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Security Profile

Configuring a Security Profile

Context

You need to configure a security profile and a security policy for the Mesh to ensure security. The WPA2+PSK+AES security policy is recommended for a WDS security profile.
NOTE:

The security policy can be set to open system authentication only for the Mesh network in rail transportation scenarios.

By default, the system provides the Mesh profile default. Both the default Mesh profile default and a self-defined Mesh profile have the security profile default-mesh referenced by default. In the security profile default-mesh, the security policy is set to WPA2+PSK+AES and the security key to huawei_secmesh. If the default security profile default-mesh is used, you are advised to change the security key of the profile to ensure security.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run security-profile name profile-name

    A security profile is created, and the security profile view is displayed.

    By default, security profiles default and default-mesh are available in the system.

  4. Run security wpa2 psk { pass-phrase | hex } key-value aes

    A security policy is configured for the security profile.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 111806

Downloads: 368

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next