No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Non-Fast Roaming Between APs in the Same Service VLAN

Configuring Non-Fast Roaming Between APs in the Same Service VLAN


  1. Configure non-fast roaming.

    Any of the following security policies can be configured for an AP:

    • WEP open system authentication
    • WEP shared key authentication
    • WPA/WPA2-PSK
    • WPA-802.1X
    • WPA2-802.1X (PMK fast roaming is not supported by STAs.)

    After basic service configurations are complete, the STAs can implement non-fast roaming.

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 157855

Downloads: 436

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next