No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting an AP

Deleting an AP

Context

To disconnect an AP from the current AC or enable an AP to go online on another AC, you can delete the AP from the current AC.

Deleting an AP will interrupt services of STAs connected to the AP. Exercise caution when you delete an AP.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run undo ap { ap-name ap-name | ap-id ap-id | ap-mac ap-mac | ap-group group-name | all }

    An AP is deleted.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 161496

Downloads: 446

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next