No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Mesh Whitelist

(Optional) Configuring a Mesh Whitelist


To prevent a vehicle-mounted AP from connecting to trackside APs along a different track from the vehicle-mounted AP, add MAC addresses of all trackside APs along the local track to the Mesh whitelist of the vehicle-mounted AP.


  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run mesh-whitelist-profile name whitelist-name

    A Mesh whitelist profile is created, and the Mesh whitelist profile view is displayed.

    By default, no Mesh whitelist profile is available in the system.

  4. Run peer-ap mac mac-address

    MAC addresses of neighboring APs that are allowed to connect to an AP are added to the Mesh whitelist profile.

    By default, no MAC address of a neighboring AP is added to a Mesh whitelist profile.


    When configuring vehicle-ground fast link handover, add MAC addresses of trackside APs allowed to connect to a vehicle-mounted AP to a whitelist.

  5. Run quit

    Return to the WLAN view.

  6. Run quit

    Return to the system view.

  7. Run interface wlan-radio wlan-radio-number

    The radio interface view is displayed.

  8. Run mesh-whitelist-profile whitelist-name [ index index ]

    The Mesh whitelist profile is bound to the AP radio.

    By default, no Mesh whitelist profile is bound to an AP radio.

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 160294

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next