No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WIDS Profile

WIDS Profile

WIDS profiles provide mechanisms to protect WLAN networks. WIDS profiles are bound to AP groups or APs so that they can take effect. For details, see Configuring Device Detection and Containment and Configuring Attack Detection and a Dynamic Blacklist.

A WIDS profile supports the following functions:
  • WIDS device detection and countering

    • APs detect Wi-Fi devices within their coverage range and determine whether they are authorized.

    • You can configure a WIDS spoof SSID profile and a WIDS whitelist profile to identify spoofing SSIDs and add the trusted devices to the whitelist. After configuring these profiles, you bind them to the WIDS profile.

    • Countermeasures are taken on the detected rogue device so that rogue STAs cannot access the network or authorized STAs will not access rogue APs.

  • WIDS attack detection and dynamic blacklist

    • APs detect Wi-Fi devices on a network that launch attacks, including flood attacks, weak IV attacks, spoofing attacks, and Brute force PSK cracking attacks.

    • After the dynamic blacklist function is enabled, attacking devices are added to the dynamic blacklist and packets from these devices are discarded.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 109782

Downloads: 368

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next