No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying the Configuration to a VAP Profile or an AP System Profile

Applying the Configuration to a VAP Profile or an AP System Profile

Context

You can configure multiple STA whitelist and blacklist profiles on the device and apply the profiles to different VAP profiles or AP system profiles. In a VAP profile or AP system profile, either the STA whitelist profile or STA blacklist profile takes effect at one time.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Apply the configuration to make it take effect.

    • Applying the configuration to a VAP profile

      1. Run the vap-profile name profile-name command to enter the VAP profile view.

      2. Run the sta-access-mode { blacklist | whitelist } profile-name command to specify whether the STA blacklist or STA whitelist profile takes effect.

        By default, no STA blacklist or whitelist profile applies to a VAP profile.

    • Applying the configuration to an AP system profile.

      1. Run the ap-system-profile name profile-name command to enter the AP system profile view.
      2. Run the sta-access-mode { blacklist | whitelist } profile-name command to specify whether the STA blacklist or STA whitelist profile takes effect.

        By default, no STA blacklist or whitelist profile is bound to an AP system profile.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 122654

Downloads: 379

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next