No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the USB Function on an AP

Configuring the USB Function on an AP


When users need to save or transfer files using the USB interface provided on some APs, the USB function can be enabled using the usb enable command. When the USB function is enabled, the power consumption of the AP will increase, which may affect other functions. You are advised to run the undo usb enable command to disable the USB function after using it.


  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run ap-system-profile name profile-name

    An AP system profile is created, and the AP system profile view is displayed.

    By default, the system provides the AP system profile default.

  4. Run usb enable

    The USB function on the AP is enabled.

    By default, the USB function on an AP is disabled.

    The USB function is supported only by the AP2050DN, AP2050DN-E, AP2050DN-S, AP2051DN, AP2051DN-E, AP2051DN-S, AP4030TN, AP4050DN-E, AP4051DN, AP4151DN, AP4051DN-S, AP4051TN, AP5050DN-S, AP6050DN, AP6150DN, AP6052DN, AP7050DE, AP7050DN-E, AP7052DE, AP7052DN, AP7152DN, R250D-E, R251D-E.

    Some AP functions may be affected after the USB function is enabled. For details, see Understanding PoE in the Configuration - AP Management Configuration Guide-Managing the PoE Function of an AP.

    The affected AP functions are restored after the USB function is disabled.

  5. Run quit

    Return to the WLAN view.

  6. Bind an AP system profile to an AP group or AP.

    • Binding an AP system profile to an AP group.
      1. Run the ap-group name group-name command to enter the AP group view.
      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP group.

        By default, the AP system profile default is bound to an AP group.

    • Binding an AP system profile to an AP.
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP.

        By default, no AP system profile is bound to an AP.

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 160552

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next