No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the AP Group to Which APs Belong

Modifying the AP Group to Which APs Belong


If the current AP group is not applicable to an AP or the AP is added to an incorrect AP group, you can modify configurations to add the AP to a new AP group.

Modifying the AP group results in AP restart and service interruption. Exercise caution when performing this operation.

You can also modify AP groups in the AP provisioning view. For details, see Configuring AP Online Parameters.


  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run ap-regroup { ap-name ap-name | ap-id ap-id } new-group new-group-name

    An AP is added to a new AP group.


    The AP group to which an AP is added must have been created using the ap-group name group-name command.

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 158776

Downloads: 436

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next