No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring APs to Go Online

Configuring APs to Go Online

Pre-configuration Tasks

To enable APs to discover an AC and go online on the AC after passing security authentication, you need to configure network elements (NEs), interconnections between NEs, and AC system parameters.

Before configuring APs to go online, perform the task of CLI Login Configuration.

Configuration Procedure

Perform the following steps in the listed order.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 148572

Downloads: 425

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next