No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring APs to Go Online

Configuring APs to Go Online

Context

After network interworking is configured, configure APs to go online on an AC so that the AC can deliver configurations to the APs.

This document only describes basic go-online configurations of APs on the AC. For more information, see Configuring APs to Go Online.

Perform the following operations on the AC to configure an AP to go online.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vlan batch vlan-id

    A VLAN is created.

  3. Run interface vlanif vlan-id

    A VLANIF interface is created, and the VLANIF interface view is displayed.

    By default, no VLANIF interface is created.

  4. Run ip address ip-address { mask | mask-length }

    An IP address and a subnet mask are configured for the VLANIF interface.

    By default, no IP address is configured for a VLANIF interface.

  5. Run quit

    Return to the system view.

  6. Run capwap source interface vlanif vlan-id

    The VLANIF interface is configured as the source interface of the CAPWAP tunnel established between the AP and AC.

    By default, no source interface is configured for the CAPWAP tunnel established between the AP and AC.

  7. Run wlan

    The WLAN view is displayed.

  8. Run regulatory-domain-profile name profile-name

    A regulatory domain profile is created and the regulatory domain profile view is displayed.

    By default, the system provides the regulatory domain profile default.

  9. Run country-code country-code

    The country code is configured.

    By default, the country code CN is configured.

  10. Run quit

    Return to the WLAN view.

  11. Run ap-group name group-name

    An AP group is created, and the AP group view is displayed.

  12. Run regulatory-domain-profile profile-name

    The regulatory domain profile is bound to the AP group

    By default, the regulatory domain profile default is bound to the AP group.

  13. Run quit

    Return to the WLAN view.

  14. Run ap-id ap-id [ [ type-id type-id | ap-type ap-type ] { ap-mac ap-mac | ap-sn ap-sn | ap-mac ap-mac ap-sn ap-sn } ] or ap-mac ap-mac [ type-id type-id | ap-type ap-type ] [ ap-id ap-id ] [ ap-sn ap-sn ]

    The AP is imported in offline mode, and the AP view is displayed.

  15. Run ap-name ap-name

    The AP name is configured.

    By default, no AP name is configured for an AP.

  16. Run ap-group group-name

    The AP is added to the AP group.

    By default, no AP group is configured.

Verifying the Configuration

  • Run the display ap all command to check whether the AP goes online on the AC.
  • Run the display capwap configuration command to check the source interface or source IP address of the AC.
  • Run the display regulatory-domain-profile { all | name profile-name } command to check the country code configured in the regulatory domain profile.
  • Run the display references regulatory-domain-profile name profile-name command to check reference information about the regulatory domain profile.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 161154

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next