No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Attack Detection and Dynamic Blacklist Configuration

Verifying the Attack Detection and Dynamic Blacklist Configuration

Context

After the WIDS configuration is complete, you can check WIDS profiles on the device, including their configuration and profile reference information, WIDS device attacking device list and dynamic blacklist.

Procedure

  • Run the display wids-profile { all | name profile-name } command to check information about the WIDS profile.
  • Run the display references wids-whitelist-profile name profile-name command to check reference information about the WIDS whitelist profile.
  • Run the display ap-system-profile { all | name profile-name } command to check the configuration of the AP system profile.
Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 110362

Downloads: 368

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next