No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying the Configuration

Applying the Configuration

Context

After WLAN network security is configured in a VAP profile, you need to bind the VAP profile to an AP group, AP, AP radio, or AP group radio. After being delivered to APs, the configuration in a VAP profile can take effect on the APs.

After a VAP profile is applied to an AP group or AP, the parameter settings in the profile take effect on all radios of the AP group or AP. After a radio profile is applied in the AP group radio or AP radio view, the parameter settings in the profile take effect on the specified AP radio or radios in the AP group.

Procedure

  • Bind a VAP profile to an AP group.
    1. Run the system-view command to enter the system view.
    2. Run the wlan command to enter the WLAN view.
    3. Run the ap-group name group-name command to enter the AP group view.
    4. Run the vap-profile profile-name wlan wlan-id { radio { radio-id | all } } command to bind the VAP profile to the radio.

      By default, no VAP profile is bound to a radio.

  • Bind a VAP profile to an AP.
    1. Run the system-view command to enter the system view.
    2. Run the wlan command to enter the WLAN view.
    3. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
    4. Run the vap-profile profile-name wlan wlan-id { radio { radio-id | all } } command to bind the VAP profile to the radio.

      By default, no VAP profile is bound to a radio.

  • Apply a VAP profile in the AP group radio view.
    1. Run the system-view command to enter the system view.
    2. Run the wlan command to enter the WLAN view.
    3. Run the ap-group name group-name command to enter the AP group view.
    4. Run the radio radio-id command to enter the radio view.
    5. Run the vap-profile profile-name wlan wlan-id command to bind the VAP profile to the radio.

      By default, no VAP profile is bound to a radio.

  • Apply a VAP profile in the AP radio view.
    1. Run the system-view command to enter the system view.
    2. Run the wlan command to enter the WLAN view.
    3. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
    4. Run the radio radio-id command to enter the radio view.
    5. Run the vap-profile profile-name wlan wlan-id command to bind the VAP profile to the radio.

      By default, no VAP profile is bound to a radio.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 124070

Downloads: 379

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next