No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Band Steering

Band Steering

Overview

Most STAs support both 5 GHz and 2.4 GHz frequency bands but usually associate with the 2.4 GHz radio by default when connecting to the network. As a result, the 2.4 GHz frequency band with fewer channels is congested, heavily-loaded, and has severe interference. The 5 GHz frequency band with more channels and less interference is not well used. When the 2.4 GHz frequency band has many users or severe interference, the 5 GHz frequency band can provide better access service for wireless users. Users must manually select the 5 GHz radio to connect to it.

The band steering function enables an AP to steer STAs to the 5 GHz radio first, which reduces traffic load and interference on the 2.4 GHz radio and improves user experience.

NOTE:

To implement band steering, an AP must have the same SSID and security policy on the 5 GHz and 2.4 GHz radios.

Implementation

Figure 6-9 shows the implementation of band steering, involving two phases:
Figure 6-9  Band steering

  1. 5G-prior access

    Before the number of access STAs on an AP exceeds the start threshold for load balancing between radios, the AP preferentially connects a new STA to the 5 GHz radio.

    As shown in the figure, when the AP receives a Probe Request frame from the STA (STA_1), it checks the radio that receives the frame. If the Probe Request frame is received by the 5 GHz radio, the AP returns a Probe Response frame. The STA then associates with the 5 GHz radio, and the AC records the supported frequency band of the STA as the 5 GHz frequency band.

    If the 2.4 GHz radio continuously receives Probe Request frames but the 5 GHz radio does not receive any, the AP returns a Probe Response frame through the 2.4 GHz radio. The STA then associates with the 2.4 GHz radio, and the AC records the supported frequency band of the STA as the 2.4 GHz frequency band.

    When STA_1 associates with the AP again, the AP first checks the frequency band supported by the STA. If STA_1 supports only the 2.4 GHz frequency band, the AP immediately permits the STA to access the 2.4 GHz radio.

  2. Load balancing between radios

    After the number of access STAs on an AP exceeds the start threshold for load balancing between radios, the AP determines the radio to which the STA connects based on the difference between the number of access STAs on the 2.4 GHz radio and that on the 5 GHz radio.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 150327

Downloads: 427

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next