No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying the Configuration to an AP Group or a Specific AP

Applying the Configuration to an AP Group or a Specific AP

Context

WIDS services are implemented on APs, including WLAN device detection and containment, attacking device detection, and dynamic blacklist; therefore, the WIDS profile carrying the WIDS services must be applied to an AP group or a specific AP.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Bind the VAP profile to radios of an AP group or a specific AP.

    NOTE:
    This step is optional when a radio works in monitor mode. When a radio works in monitor mode, the device automatically checks whether the radio has a VAP bound. If not, the device automatically creates a VAP and binds it to the radio to ensure normal scanning.
    1. Run the vap-profile name profile-name command to create a VAP profile.

      By default, the system provides the VAP profile default.

      NOTE:

      When a VAP profile exists in the system, you can use the existing one or create a new one.

    2. Run the quit command to return to the WLAN view.
    3. Bind the VAP profile to radios of an AP group or a specific AP as required to make the radios properly work. For details, see Binding VAP Profiles.
    4. Run the quit command to return to the WLAN view.

  4. Bind a WIDS profile to an AP group or a specific AP.

    • Binding a WIDS profile to an AP group.
      1. Run the ap-group name group-name command to enter the AP group view.
      2. Run the wids-profile profile-name command to bind the WIDS profile to a radio in an AP group.

        By default, the WIDS profile default is bound to an AP group.

    • Binding a WIDS profile to a specific AP.
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
      2. Run the wids-profile profile-name command to bind the WIDS profile to a radio of a specific AP.

        By default, no WIDS profile is bound to a specific AP.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 157864

Downloads: 436

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next