No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WIDS Whitelist Profile

WIDS Whitelist Profile

After the rogue device containment function is enabled, rogue APs can be detected and contained. However, there may be APs of other vendors or on other networks working in the existing signal coverage areas. If these APs are contained, their services will be affected. To prevent this situation, you can configure the WIDS whitelist profile to add these APs to a WIDS whitelist which includes an authorized MAC address list, OUI list, and SSID list.

For the detailed configuration, see (Optional) Configuring a WIDS Whitelist in the Configuration-WLAN Security Configuration Guide.

Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 146701

Downloads: 423

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next