No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Understanding the Shopping Mall and Supermarket Solution - Personnel and Asset Management

Understanding the Shopping Mall and Supermarket Solution - Personnel and Asset Management

Figure 31-2 shows implementation of the personnel and asset management IoT solution.

Figure 31-2  Network for the personnel and asset management IoT solution
  1. Bind Bluetooth tags to personnel and assets. Built-in Bluetooth modules of APs scan for Bluetooth tags in the surrounding environment and collect BLE broadcast frames sent by Bluetooth tags. A BLE broadcast frame carries Bluetooth tag information such as the RSSI calibration value, battery level, and device disconnection alarms.

    Bluetooth tags periodically send BLE broadcast frames but do not need to connect to the WLAN.

    NOTE:

    Use a scanning terminal to associate or manually record mappings between Bluetooth tags and personnel/assets, and synchronize the mappings to the location server so that the location server can identify the personnel or assets based on the Bluetooth tags.

  2. The APs report Bluetooth tag information to the AC, such as the RSSI calibration value, power, and Bluetooth tag disconnection alarms.

  3. The AC then reports all the Bluetooth tag information and Bluetooth tag disconnection alarms to the location server.

  4. Make a floor plan on the location server, create a location map model, add APs with built-in Bluetooth modules, and determine the AP installation locations. Compute locations of Bluetooth tags, and provide graphical location information and moving tracks of personnel and assets, and generate asset reports. In addition, you can monitor working status of the Bluetooth tags.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 160923

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next