No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - WLAN-AC

S5700 and S6720 V200R012C00

This document describes the configurations of WLAN, including WLAN Service Configuration, Radio Resource Management, Roaming, WLAN QoS, WLAN Security, WDS, Mesh, Location, Hotspot 2.0, Dual-Link Cold Backup, N+1 Backup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Default Domain Name Suffix for APs

Configuring the Default Domain Name Suffix for APs

Context

Devices with the same system name may exist in different domains. In this case, you can configure a fully qualified domain name (FQDN) for a device to uniquely identify it. The FQDN of a device consists of the default domain name suffix and device name. You can configure the default domain name suffix for a device.

Procedure

  • Configure the default domain name suffix for an AP in the AP view.
    1. Run the system-view command to enter the system view.
    2. Run the wlan command to enter the WLAN view.
    3. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
    4. Run the ip domain-name domain-name command to configure the default domain name suffix.

      By default, no default domain name suffix is provided.

  • Configure the default domain name suffix for APs in the AP group view.
    1. Run the system-view command to enter the system view.
    2. Run the wlan command to enter the WLAN view.
    3. Run the ap-group name group-name command to enter the AP group view.
    4. Run the ip domain-name domain-name command to configure the default domain name suffix.

      By default, no default domain name suffix is provided.

Translation
Download
Updated: 2018-12-24

Document ID: EDOC1100038361

Views: 161342

Downloads: 445

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next